Changes:
* When handling RR commands with the P/F flag set, check to see if
the socket file descriptor is currently being monitored; if so,
reply RR, otherwise reply RNR
* When handling RNR commands with the P/F flag set, apply the same
aforementioned logic as used for handling RR commands
* When handling RNR responses, clear the socket file descriptor so
as to avoid infinite loop polling and to indicate that the remote
station cannot receive packets currently
Changes:
* Rename seq_send to vs, ie, V(S)
* Rename seq_recv to vr, ie, V(R)
* Ensure handling RR responses updates V(S) with the N(R) value of
the received frame
Fix issues with TX slots in src/sock.c wherein packets saved for resend
would not be able to be resent, as their total length was not encoded
properly into the slot structure
Changes:
* Fix Classes of Operations and HDLC parameter bit flags in
include/patty/ax25.h to match the documentation after more careful
analysis; resolve issues with byte order
* Add support for previously missing HDLC parameters to function
patty_print_params()
* Fix Info TX/RX field encodings to be in bits, rather than bytes
* Implement patty_ax25_sock_realloc_bufs() to reallocate buffers
based on current window and I frame sizes
* Implement patty_ax25_sock_params_upgrade() to upgrade a socket's
parameters to the AX.25 v2.2 documented defaults; this will not
change parameters if the socket is already set to v2.2
* Implement patty_ax25_sock_params_max() to upgrade a socket's
parameters to the highest values supported by patty
* Reimplement patty_ax25_sock_send_xid() to send highest desired
parameters, rather than the values currently set on the socket
* When receiving XID frames destined to listening sockets, use
patty_ax25_sock_params_max() to negotiate from high to low
parameters
* When receiving SABME flags, use patty_ax25_sock_params_upgrade()
to ensure at least base AX.25 v2.2 parameter defaults are set
* Fix issue where outbound connections initiated with XID were
unable to time out after N retries
Implement new patty client code, replacing src/call.c with src/client.c
providing clients with an interface dealing with file descriptors valid
in their process space; this also obviates the need to open a Unix
domain socket to a patty server explicitly, and helps keep track of
sockets opened on the server, locally
Changes:
* Implement patty_client_new() to handle opening the server Unix
domain socket, and to allocate a dict for mapping server-side
sockets with current process file descriptors
* Reimplement all server calls in src/call.c around the new
patty_client type; calls which result in the creation of a
Unix98 PTY by the patty server now handle opening the local PTY
and setting the file descriptor to raw mode. Furthermore, these
calls deal exclusively in terms of current process file
descriptors
* Refactor src/server.c to use the new patty_client type and calls
* Refactor examples/client.c, examples/server.c, examples/ax25dump.c
to use the new patty_client type and calls
* Fix a bug in src/server.c, respond_accept() wherein a 0, rather
than the file descriptor of the socket, is sent to the client as a
return value
Modify patty_kiss_tnc_new_fd() to avoid tcgetattr()/tcsetattr() when
passed a file descriptor for a PTY master, to address incompatibility
with BSD kernelspace Unix98 PTY implementations
More strictly adhere to the behaviors of Timers T1, T2 and T3 as
prescribed in the AX.25 v2.2 Specification, Section 4.4.5 "Timeout Error
Recovery" descriptions for Timer T1 and T3, as well as Section 6.7.1.2
"Response Delay Timer T2"
Changes:
* Implement patty_timer type to store both a struct timeval and a
bitfield for indicating timer state; currently, this only holds
the PATTY_TIMER_RUNNING flag to indicate whether a timer has been
stopped (irrespective of its "expired" status)
* Remove 'target' argument from patty_timer_start(); instead, rely
on select() polling every 1s to cause events to trigger at a
regular interval
* Make patty_timer_expired() return false if PATTY_TIMER_RUNNING is
not set
* Implement patty_timer_stop() to clear the PATTY_TIMER_RUNNING flag
of a timer
* Make patty_timer_clear() set all fields to zero, including
clearing the PATTY_TIMER_RUNNING flag
Fix incorrect control P/F encoding in src/sock.c wherein the P/F flag
value was passed to patty_ax25_sock_send() as an information field body
length, rather than the pf argument for the internal functions
control_i(), control_s(), and control_u(); this corrects the following
functions:
* patty_ax25_sock_send_rr()
* patty_ax25_sock_send_rnr()
* patty_ax25_sock_send_rej()
Implement AX.25 v2.2 Section 6.7.1.2 "Response Delay Timer T2" as per
specification; do not acknowledge several sequential I frames until a
certain period of time has passed since the receipt of the most recent I
frame
In patty_ax25_sock_send(), only use a numbered TX slot in the ring
buffer when sending I frames, rather than the prior case when the frame
was not a U frame
Fix patty_timer_start() to only set the running timer to the value of
the timer being started, rather than adding the value of the started
timer to the running timer
Changes:
* Make ./configure generate src/config.h, which will contain the
appropriate #include for endian.h, or #defines to provide
alternatives
* Make sure to include config.h in src/frame.c to allow compiling
on macOS
Fix patty_kiss_tnc_new_fd() to only attempt tcgetattr()/tcsetattr() on
file descriptors for whom isatty() is true, allowing files and sockets
to once again be used
Changes:
* Implement patty_timer_expired() to determine if a timer has
expired or has gone negative
* Implement patty_timer_cancel() to set a timer to zero
* Implement patty_timer_start() to initialize a timer, add a
specified number of milliseconds, and ensure a target timer (such
as the server timer) is set for at least that value as well
* Implement patty_timer_tick() to subtract an elapsed time value
from a timer
* Remove functions specific to each timer in src/sock.c, as those
can now be handled generically by src/timer.c
* Replace calls to patty_ax25_sock_timer_t1_*() with patty_timer_*()
calls instead; reference the struct timeval objects directly
within the sock (for the time being, pending opaque structures)
Changes:
* Combine patty_ax25_sock_ack_timer_restart() and _set() into one
method, patty_ax25_sock_ack_timer_start(), which accepts a new
struct timeval argument to potentially add the Timer T1 value to
* Reorder some functions in src/sock.c, include/patty/ax25/sock.h
Changes:
* Implement patty_ax25_sock_timeR_ack_restart() to initialize the
XID/SABM/SABME ack Timer T1
* Implement patty_ax25_sock_timer_ack_cancel() to clear Timer T1
* Implement patty_ax25_sock_timer_ack_sub() to subtract the value of
a struct timeval from Timer T1
* Implement patty_ax25_sock_timer_ack_expired() to indicate if the
ack Timer T1 has expired
Other changes:
* Rearrange patty_ax25_sock a bit
Changes:
* Use cfmakeraw() to set raw TTY attributes in KISS TNC constructor
patty_kiss_tnc_new_fd()
* Restore previous TTY attributes in patty_kiss_tnc_destroy()
Begin to reimplement patty_ax25_sock_reset() to follow the AX.25 v2.2
Specification, Section 6.5 "Resetting Procedure" indications to set V(S)
and V(R) to 0
Rename patty_ax25_sock_reset() to patty_ax25_sock_init(), so as to allow
for the implementation of a future _reset() method which shall be used
to implement AX.25 v2.2 Section 6.5 "Resetting Procedure"
Changes:
* Make patty_ax25_sock_send_rr() accept a P/F flag value
* Make patty_ax25_sock_send_rnr() accept a P/F flag value
* Make patty_ax25_sock_send_rej() accept a P/F flag value
After performing XID parameter negotiation, do not simply use the
negotiated TX buffer size when allocating the RX buffer; this resolves
an issue wherein read()s into the RX buffer (allocated with a size equal
to the TX buffer, which may be smaller) would cause memory errors
Changes:
* Allow REJ handling to occur when the V(S) send state counter wraps
to a value lower than indicated in the frame N(R) field
* Fix tx_slot() in src/sock.c to not buffer overflow when the TX
window is less than the maximum for the SABM/SABME mode
Changes:
* Add an enum patty_ax25_version argument to the function
patty_ax25_sock_upgrade() to allow upgrading a socket to a certain
set of AX.25 defaults
