xan/awips2
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
awips2/edexOsgi/com.raytheon.uf.common.dataplugin.warning/utility/common_static/base/warngen/burnScarFlashFloodWarning.xml
Jonathan Sanchez 86a8ca4a30 Issue #3419 Refactored watches to use the county table. 
Change-Id: Ide7e07813203213511640d5ee515e73b278089c1

Former-commit-id: 135d7ffa84af58d7b3c9575e654fa1298b76b2e2
2014-07-22 15:32:12 -05:00

277 lines
20 KiB
XML
Executable file
Raw Blame History

<!-- Burn Scar Flash Flood Warning configuration for County-based products-->
<!-- This template can be used for any pre-defined polygon that a site needs
to issue a FFW for outside of a dam break. -->
<!-- Created by Phil Kurimski 02-07-2013 for OB13.2.1-5
Phil Kurimski 09-19-2013 added geospatialConfig.xml
-->
<warngenConfig>
<!-- INCLUDE ALL GEOSPTATIAL INFORMATION FOR THIS PRODUCT
ANY pointSource/areaSource/pathcastConfig OVERRIDES TO THAT FILE CAN BE
PLACED IN FULL BELOW THE INCLUDE LINE BELOW. -->
<include file="geospatialConfig_COUNTY.xml"/>
<!-- Include Various geospatial XML files to create their objects. These are *NOT*
turned on unless the corresponding .vm file is turned on in a given template's .vm file
-->
<include file="mileMarkers.xml"/>
<!-- To enable, make sure mileMarkers.vm is added/uncommented in a WarnGen template's .vm file -->
<include file="pointMarkers.xml"/>
<!-- To enable, make sure pointMarkers.vm is added/uncommented in a WarnGen template's .vm file -->
<!-- Config distance/speed units -->
<unitDistance>mi</unitDistance>
<unitSpeed>mph</unitSpeed>
<!-- OPTIONAL: Maps to load on template selection. Refer to 'Maps' menu in CAVE.
The various menu items are also the different maps
that can be loaded with each template. -->
<maps>
<!-- <map>FFMP Small Stream Basin Links</map> -->
<map>County Names</map>
<map>County Warning Areas</map>
<map>FFMP Small Stream Basin Links</map>
<map>Major Rivers</map>
</maps>
<!-- Followups: VTEC actions of allowable followups when this template is selected
Each followup will become available when the appropriate time range permits.
-->
<followups>
<followup>NEW</followup>
<followup>COR</followup>
<followup>EXT</followup>
</followups>
<!-- Phensigs: The list of phenomena and significance combinations that this template applies to -->
<phensigs>
<phensig>FF.W</phensig>
</phensigs>
<!-- Enables/disables user from selecting the Restart button the GUI -->
<enableRestart>true</enableRestart>
<!-- Enable/disables the system to lock text based on various patterns -->
<autoLockText>true</autoLockText>
<!-- Enables/disables the 'Dam Break Threat Area' button -->
<enableDamBreakThreat>true</enableDamBreakThreat>
<!-- Included watches: If a tornado watch or severe thunderstorm watch is to be
included with the warning product include TO.A and/or SV.A,
respectively. Please refer to 'includedWatchAreaBuffer' in <areaConfig/>.
<includedWatches>
<includedWatch>TO.A</includedWatch>
<includedWatch>SV.A</includedWatch>
</includedWatches>
-->
<!-- durations: the list of possible durations of the warning -->
<defaultDuration>45</defaultDuration>
<durations>
<duration>30</duration>
<duration>45</duration>
<duration>60</duration>
<duration>90</duration>
<duration>120</duration>
<duration>180</duration>
<duration>240</duration>
<duration>360</duration>
<duration>480</duration>
</durations>
<lockedGroupsOnFollowup>ic</lockedGroupsOnFollowup>
<bulletActionGroups>
<bulletActionGroup action="NEW" phen="FF" sig="W">
<bullets>
<bullet bulletName="ffwEmergency" bulletText="**SELECT FOR FLASH FLOOD EMERGENCY**" parseString="FLASH FLOOD EMERGENCY"/>
<bullet bulletName="icrs" bulletText="Also snowmelt" parseString=".RS."/>
<bullet bulletText="*********** SOURCE (CHOOSE 1) **********" bulletType="title"/>
<bullet bulletName="doppler" bulletText="Doppler radar indicated" bulletGroup="source" bulletDefault="true" parseString="DOPPLER RADAR INDICATED"/>
<!--
<bullet bulletName="dopplerGauge" bulletText="Doppler radar and automated gauges" bulletGroup="source" parseString="DOPPLER RADAR AND AUTOMATED RAIN GAUGES"/>
<bullet bulletName="trainedSpotters" bulletText="Trained spotters reported" bulletGroup="source" parseString="TRAINED WEATHER SPOTTERS REPORTED"/>
<bullet bulletName="public" bulletText="Public reported" bulletGroup="source" parseString="THE PUBLIC REPORTED"/>
<bullet bulletName="lawEnforcement" bulletText="Local law enforcement reported" bulletGroup="source" parseString="LOCAL LAW ENFORCEMENT REPORTED"/>
<bullet bulletName="emergencyManagement" bulletText="Emergency management reported" bulletGroup="source" parseString="EMERGENCY MANAGEMENT REPORTED"/>
-->
<!-- The following bullets will add satellite and gauges as a source. If you would like to use this
in your template uncomment the next few lines. -->
<!-- <bullet bulletName="satellite" bulletText="satellite estimates" bulletGroup="source" parseString="SATELLITE ESTIMATES"/>
<bullet bulletName="satelliteGauge" bulletText="satellite estimates and automated gauges" bulletGroup="source" parseString="SATELLITE AND "/> -->
<bullet bulletText="*********** (OPTIONAL) DEBRIS FLOW INFO **********" bulletType="title"/>
<bullet bulletName="burnScar" bulletText="Burn scar area with debris flow" bulletGroup="addevent" parseString="BURN SCAR"/>
<bullet bulletName="mudSlide" bulletText="Mud Slides" bulletGroup="addevent" parseString="MUD SLIDE"/>
<bullet bulletText="*********** RAIN SO FAR (OPTIONAL) **********" bulletType="title"/>
<!--
<bullet bulletName="rain1" bulletText="One inch so far" bulletGroup="rainAmt" parseString="ONE INCH"/>
<bullet bulletName="rain2" bulletText="Two inches so far" bulletGroup="rainAmt" parseString="TWO INCHES"/>
<bullet bulletName="rain3" bulletText="Three inches so far" bulletGroup="rainAmt" parseString="THREE INCHES"/>
-->
<bullet bulletName="rainEdit" bulletText="User defined amount" bulletGroup="rainAmt" parseString="INCHES OF RAIN HAVE FALLEN"/>
<bullet bulletText="*********** ADDITIONAL INFO ***********" bulletType="title"/>
<bullet bulletName="listofcities" bulletDefault="true" bulletText="Select for a list of cities" bulletGroup="pcast"/>
<!--
<bullet bulletName="addRainfall" bulletText="Additional rainfall of XX inches expected" parseString="ADDITIONAL RAINFALL"/>
<bullet bulletName="particularStream" bulletText="Flooding is occurring in a particular stream/river" parseString="FLOOD WATERS ARE MOVING DOWN"/>
<bullet bulletName="drainages" bulletText="Automated list of drainages" parseString="THIS INCLUDES THE FOLLOWING STREAMS AND DRAINAGES" loadMap="River Drainage Basins"/>
-->
<bullet bulletText="**** CALL TO ACTIONS (CHOOSE 1 OR MORE) ****" bulletType="title"/>
<!-- end all call to action bullets with "CTA" ex: "obviousNameCTA" -->
<bullet bulletName="ffwEmergencyCTA" bulletText="**FLASH FLOOD EMERGENCY CTA**" parseString="FLASH FLOOD EMERGENCY"/>
<bullet bulletName="actQuicklyCTA" bulletText="Act Quickly..." bulletDefault="true" parseString="HIGHER GROUND NOW. ACT QUICKLY TO PROTECT YOUR LIFE."/>
<bullet bulletName="childSafetyCTA" bulletText="Child Safety..." parseString="KEEP CHILDREN AWAY FROM STORM DRAINS"/>
<bullet bulletName="nighttimeCTA" bulletText="Nighttime flooding..." parseString="BE ESPECIALLY CAUTIOUS AT NIGHT WHEN"/>
<bullet bulletName="safetyCTA" bulletText="Safety...by foot or motorist" parseString="DO NOT ENTER OR CROSS FLOWING WATER"/>
<bullet bulletName="turnAroundCTA" bulletText="Turn around...dont drown" parseString="TURN AROUND...DONT DROWN"/>
<bullet bulletName="stayAwayCTA" bulletText="Stay away or be swept away" parseString="STAY AWAY OR BE SWEPT AWAY"/>
<bullet bulletName="arroyosCTA" bulletText="Arroyos..." parseString="ARROYOS...STREAMS AND RIVERS CAN BECOME RAGING KILLER CURRENTS"/>
<bullet bulletName="burnAreasCTA" bulletText="Burn Areas..." parseString="MOVE AWAY FROM RECENTLY BURNED AREAS"/>
<bullet bulletName="reportFloodingCTA" bulletText="Report flooding to local law enforcement" parseString="PLEASE REPORT TO YOUR LOCAL LAW ENFORCEMENT AGENCY WHEN YOU CAN"/>
<bullet bulletText="************************************************************" bulletType="title"/>
<bullet bulletText="* The next section is for sites to load pre-configured *"/>
<bullet bulletText="* polygons for burn scars and other scenarios needing *"/>
<bullet bulletText="* a flash flood warning. *"/>
<bullet bulletText="****** BURN SCAR AREA (Choose BurnArea and Scenario) ******" bulletType="title"/>
</bullets>
<!-- The following are examples on how to include site specific burn scars in your template
You can choose to do this by editing the template and listing each burn scar in the
template or listing the burn scars in a separate file and using the include command
This can also be done for other flash flood areas that need a pre-defined polygon -->
<include file="burnScarInfoBullet.xml"/>
<!-- include file="burnScarInfoBullet.xml"/> -->
</bulletActionGroup>
<bulletActionGroup action="EXT" phen="FF" sig="W">
<bullets>
<bullet bulletName="ffwEmergency" bulletText="**SELECT FOR FLASH FLOOD EMERGENCY**" parseString="FLASH FLOOD EMERGENCY"/>
<bullet bulletName="icrs" bulletText="Also snowmelt" parseString=".RS."/>
<bullet bulletText="*********** SOURCE (CHOOSE 1) **********" bulletType="title"/>
<bullet bulletName="doppler" bulletText="Doppler radar indicated" bulletGroup="source" bulletDefault="true" parseString="DOPPLER RADAR INDICATED"/>
<bullet bulletName="dopplerGauge" bulletText="Doppler radar and automated gauges" bulletGroup="source" parseString="DOPPLER RADAR AND AUTOMATED RAIN GAUGES"/>
<bullet bulletName="trainedSpotters" bulletText="Trained spotters reported" bulletGroup="source" parseString="TRAINED WEATHER SPOTTERS REPORTED"/>
<bullet bulletName="public" bulletText="Public reported" bulletGroup="source" parseString="THE PUBLIC REPORTED"/>
<bullet bulletName="lawEnforcement" bulletText="Local law enforcement reported" bulletGroup="source" parseString="LOCAL LAW ENFORCEMENT REPORTED"/>
<bullet bulletName="emergencyManagement" bulletText="Emergency management reported" bulletGroup="source" parseString="EMERGENCY MANAGEMENT REPORTED"/>
<!-- The following bullets will add satellite and gauges as a source. If you would like to use this
in your template uncomment the next few lines. -->
<!-- <bullet bulletName="satellite" bulletText="satellite estimates" bulletGroup="source" parseString="SATELLITE ESTIMATES"/>
<bullet bulletName="satelliteGauge" bulletText="satellite estimates and automated gauges" bulletGroup="source" parseString="SATELLITE AND "/> -->
<bullet bulletText="*********** (OPTIONAL) DEBRIS FLOW INFO **********" bulletType="title"/>
<bullet bulletName="burnScar" bulletText="Burn scar area with debris flow" bulletGroup="addevent" parseString="BURN SCAR"/>
<bullet bulletName="mudSlide" bulletText="Mud Slides" bulletGroup="addevent" parseString="MUD SLIDE"/>
<bullet bulletText="*********** RAIN SO FAR (OPTIONAL) **********" bulletType="title"/>
<bullet bulletName="rain1" bulletText="One inch so far" bulletGroup="rainAmt" parseString="ONE INCH"/>
<bullet bulletName="rain2" bulletText="Two inches so far" bulletGroup="rainAmt" parseString="TWO INCHES"/>
<bullet bulletName="rain3" bulletText="Three inches so far" bulletGroup="rainAmt" parseString="THREE INCHES"/>
<bullet bulletName="rainEdit" bulletText="User defined amount" bulletGroup="rainAmt" parseString="INCHES OF RAIN HAVE FALLEN"/>
<bullet bulletText="*********** ADDITIONAL INFO ***********" bulletType="title"/>
<bullet bulletName="listofcities" bulletText="Select for a list of cities" bulletGroup="pcast" parseString="&quot;LOCATIONS&quot;,&quot;INCLUDE...&quot;"/>
<bullet bulletName="listofcities" bulletText="Select for a list of cities" bulletGroup="pcast" parseString="WILL REMAIN OVER" showString="WILL REMAIN OVER"/>
<bullet bulletName="addRainfall" bulletText="Additional rainfall of XX inches expected" parseString="ADDITIONAL RAINFALL"/>
<bullet bulletName="particularStream" bulletText="Flooding is occurring in a particular stream/river" parseString="FLOOD WATERS ARE MOVING DOWN"/>
<bullet bulletName="drainages" bulletText="Automated list of drainages" parseString="THIS INCLUDES THE FOLLOWING STREAMS AND DRAINAGES" loadMap="River Drainage Basins"/>
<bullet bulletText="**** CALL TO ACTIONS (CHOOSE 1 OR MORE) ****" bulletType="title"/>
<!-- end all call to action bullets with "CTA" ex: "obviousNameCTA" -->
<bullet bulletName="ffwEmergencyCTA" bulletText="**FLASH FLOOD EMERGENCY CTA**" parseString="FLASH FLOOD EMERGENCY"/>
<bullet bulletName="actQuicklyCTA" bulletText="Act Quickly..." bulletDefault="true" parseString="HIGHER GROUND NOW. ACT QUICKLY TO PROTECT YOUR LIFE."/>
<bullet bulletName="childSafetyCTA" bulletText="Child Safety..." parseString="KEEP CHILDREN AWAY FROM STORM DRAINS"/>
<bullet bulletName="nighttimeCTA" bulletText="Nighttime flooding..." parseString="BE ESPECIALLY CAUTIOUS AT NIGHT WHEN"/>
<bullet bulletName="safetyCTA" bulletText="Safety...by foot or motorist" parseString="DO NOT ENTER OR CROSS FLOWING WATER"/>
<bullet bulletName="turnAroundCTA" bulletText="Turn around...dont drown" parseString="TURN AROUND...DONT DROWN"/>
<bullet bulletName="stayAwayCTA" bulletText="Stay away or be swept away" parseString="STAY AWAY OR BE SWEPT AWAY"/>
<bullet bulletName="arroyosCTA" bulletText="Arroyos..." parseString="ARROYOS...STREAMS AND RIVERS CAN BECOME RAGING KILLER CURRENTS"/>
<bullet bulletName="burnAreasCTA" bulletText="Burn Areas..." parseString="MOVE AWAY FROM RECENTLY BURNED AREAS"/>
<bullet bulletName="reportFloodingCTA" bulletText="Report flooding to local law enforcement" parseString="PLEASE REPORT TO YOUR LOCAL LAW ENFORCEMENT AGENCY WHEN YOU CAN"/>
<bullet bulletText="************************************************************" bulletType="title"/>
<bullet bulletText="* The next section is for sites to load pre-configured *"/>
<bullet bulletText="* polygons for burn scars and other scenarios needing *"/>
<bullet bulletText="* a flash flood warning. *"/>
<bullet bulletText="****** BURN SCAR AREA (Choose 1) ******" bulletType="title"/>
</bullets>
<!-- The following are examples on how to include site specific burn scars in your template
You can choose to do this by editing the template and listing each burn scar in the
template or listing the burn scars in a separate file and using the include command
This can also be done for other flash flood areas that need a pre-defined polygon -->
<include file="burnScarInfoBullet.xml"/>
<!-- include file="burnScarInfoBullet.xml"/> -->
</bulletActionGroup>
<bulletActionGroup action="COR" phen="FF" sig="W">
<bullets>
<bullet bulletName="ffwEmergency" bulletText="**SELECT FOR FLASH FLOOD EMERGENCY**" parseString="FLASH FLOOD EMERGENCY"/>
<bullet bulletName="icrs" bulletText="Also snowmelt" parseString=".RS."/>
<bullet bulletText="*********** SOURCE (CHOOSE 1) **********" bulletType="title"/>
<bullet bulletName="doppler" bulletText="Doppler radar indicated" bulletGroup="source" bulletDefault="true" parseString="DOPPLER RADAR INDICATED"/>
<!--
<bullet bulletName="dopplerGauge" bulletText="Doppler radar and automated gauges" bulletGroup="source" parseString="DOPPLER RADAR AND AUTOMATED RAIN GAUGES"/>
<bullet bulletName="trainedSpotters" bulletText="Trained spotters reported" bulletGroup="source" parseString="TRAINED WEATHER SPOTTERS REPORTED"/>
<bullet bulletName="public" bulletText="Public reported" bulletGroup="source" parseString="THE PUBLIC REPORTED"/>
<bullet bulletName="lawEnforcement" bulletText="Local law enforcement reported" bulletGroup="source" parseString="LOCAL LAW ENFORCEMENT REPORTED"/>
<bullet bulletName="emergencyManagement" bulletText="Emergency management reported" bulletGroup="source" parseString="EMERGENCY MANAGEMENT REPORTED"/>
-->
<!-- The following bullets will add satellite and gauges as a source. If you would like to use this
in your template uncomment the next few lines. -->
<!-- <bullet bulletName="satellite" bulletText="satellite estimates" bulletGroup="source" parseString="SATELLITE ESTIMATES"/>
<bullet bulletName="satelliteGauge" bulletText="satellite estimates and automated gauges" bulletGroup="source" parseString="SATELLITE AND "/> -->
<bullet bulletText="*********** (OPTIONAL) DEBRIS FLOW INFO **********" bulletType="title"/>
<bullet bulletName="burnScar" bulletText="Burn scar area with debris flow" bulletGroup="addevent" parseString="BURN SCAR"/>
<bullet bulletName="mudSlide" bulletText="Mud Slides" bulletGroup="addevent" parseString="MUD SLIDE"/>
<bullet bulletText="*********** RAIN SO FAR (OPTIONAL) **********" bulletType="title"/>
<!--
<bullet bulletName="rain1" bulletText="One inch so far" bulletGroup="rainAmt" parseString="ONE INCH"/>
<bullet bulletName="rain2" bulletText="Two inches so far" bulletGroup="rainAmt" parseString="TWO INCHES"/>
<bullet bulletName="rain3" bulletText="Three inches so far" bulletGroup="rainAmt" parseString="THREE INCHES"/>
-->
<bullet bulletName="rainEdit" bulletText="User defined amount" bulletGroup="rainAmt" parseString="INCHES OF RAIN HAVE FALLEN"/>
<bullet bulletText="*********** ADDITIONAL INFO ***********" bulletType="title"/>
<bullet bulletName="listofcities" bulletText="Select for a list of cities" bulletGroup="pcast" parseString="&quot;LOCATIONS&quot;,&quot;INCLUDE...&quot;"/>
<bullet bulletName="listofcities" bulletText="Select for a list of cities" bulletGroup="pcast" parseString="WILL REMAIN OVER" showString="WILL REMAIN OVER"/>
<bullet bulletName="addRainfall" bulletText="Additional rainfall of XX inches expected" parseString="ADDITIONAL RAINFALL"/>
<bullet bulletName="particularStream" bulletText="Flooding is occurring in a particular stream/river" parseString="FLOOD WATERS ARE MOVING DOWN"/>
<bullet bulletName="drainages" bulletText="Automated list of drainages" parseString="THIS INCLUDES THE FOLLOWING STREAMS AND DRAINAGES" loadMap="River Drainage Basins"/>
<bullet bulletText="**** CALL TO ACTIONS (CHOOSE 1 OR MORE) ****" bulletType="title"/>
<!-- end all call to action bullets with "CTA" ex: "obviousNameCTA" -->
<bullet bulletName="ffwEmergencyCTA" bulletText="**FLASH FLOOD EMERGENCY CTA**" parseString="FLASH FLOOD EMERGENCY"/>
<bullet bulletName="actQuicklyCTA" bulletText="Act Quickly..." bulletDefault="true" parseString="HIGHER GROUND NOW. ACT QUICKLY TO PROTECT YOUR LIFE."/>
<bullet bulletName="childSafetyCTA" bulletText="Child Safety..." parseString="KEEP CHILDREN AWAY FROM STORM DRAINS"/>
<bullet bulletName="nighttimeCTA" bulletText="Nighttime flooding..." parseString="BE ESPECIALLY CAUTIOUS AT NIGHT WHEN"/>
<bullet bulletName="safetyCTA" bulletText="Safety...by foot or motorist" parseString="DO NOT ENTER OR CROSS FLOWING WATER"/>
<bullet bulletName="turnAroundCTA" bulletText="Turn around...dont drown" parseString="TURN AROUND...DONT DROWN"/>
<bullet bulletName="stayAwayCTA" bulletText="Stay away or be swept away" parseString="STAY AWAY OR BE SWEPT AWAY"/>
<bullet bulletName="arroyosCTA" bulletText="Arroyos..." parseString="ARROYOS...STREAMS AND RIVERS CAN BECOME RAGING KILLER CURRENTS"/>
<bullet bulletName="burnAreasCTA" bulletText="Burn Areas..." parseString="MOVE AWAY FROM RECENTLY BURNED AREAS"/>
<bullet bulletName="reportFloodingCTA" bulletText="Report flooding to local law enforcement" parseString="PLEASE REPORT TO YOUR LOCAL LAW ENFORCEMENT AGENCY WHEN YOU CAN"/>
<bullet bulletText="************************************************************" bulletType="title"/>
<bullet bulletText="* The next section is for sites to load pre-configured *"/>
<bullet bulletText="* polygons for burn scars and other scenarios needing *"/>
<bullet bulletText="* a flash flood warning. *"/>
<bullet bulletText="****** BURN SCAR AREA (Choose 1) ******" bulletType="title"/>
</bullets>
<!-- The following are examples on how to include site specific burn scars in your template
You can choose to do this by editing the template and listing each burn scar in the
template or listing the burn scars in a separate file and using the include command
This can also be done for other flash flood areas that need a pre-defined polygon -->
<include file="burnScarInfoBullet.xml"/>
<!-- include file="burnScarInfoBullet.xml"/> -->
</bulletActionGroup>
</bulletActionGroups>
<!-- The following are examples on how to include site burnscar locations in your template
You can choose to do this by editing the template and listing each dam in the
template or listing the dams in a separate file and using the include command -->
<include file="burnScarInfoBullet.xml"/>
<pointSource variable="riverdrainages">
<pointSource>ffmp_basins</pointSource>
<geometryDecimationTolerance>0.064</geometryDecimationTolerance>
<pointField>streamname</pointField>
<filter>
<mapping key="cwa">
<constraint constraintValue="$warngenCWAFilter" constraintType="EQUALS" />
</mapping>
</filter>
<withinPolygon>true</withinPolygon>
</pointSource>
</warngenConfig>
Reference in a new issue View git blame Copy permalink