#------------------------------------------------------------------------ 
# Domain File
# Original Author(s): Roberto Padilla-Hernandez,Douglas Gaer
# Alex Gibbs, Pablo Santos,Tony Freeman  
# File Creation Date: 06/01/2012
# Date Last Modified: 02/01/13
#
# Version control: 1.33
#
# Support Team:
#
# Contributors: 
#
# ----------------------------------------------------------------------- 
# ---------------------- Description and Details ------------------------ 
# ----------------------------------------------------------------------- 
#
# File used to setup a geographical domain for SWAN and WW3
#
# ----------------------------------------------------------- 
#========================================================================
#                                    CHS                                =
#  GEOGRAPHICAL DOMAIN, GEOGRAFICAL RESOLUTION AND OUTPUT TIME STEP     =
#========================================================================
export SITEID="CHS"
export REGIONID="ER"
export NELAT="33.58"
export NELON="-78.10"
export SWLAT="30.67"
export SWLON="-81.70"
export RES="1.8"
export TSTEP="3"
#
#========================================================================
#                  NESTED GRID CONFIGURATION                            =
# These nested grids are non-telescopic grids i.e all of them are       =
# nested in the main grid, and get the boundary conditions only from it =
#                                                                       =
#========================================================================
# NESTGRIDS: Number of nested grids, if = 0, nested grids and 
# location numbers below will be ignore regardless of input specifications.
#
# STATN=STA for STATIONARY RUNS, STAT=NON for NON-STATIONARY RUNS
# The default values is NONstationary for CG1 and STAtionary for the
# nested grids. Change this only if you know what you are doing.
# You can choose STA or NON for a particular nested grid.
#  
export NESTGRIDS="2"
export NESTINCG1="YES"
#
# Charleston Harbor and Beaches
export NELATN1="32.8302"
export NELONN1="-79.6121"
export SWLATN1="32.6058"
export SWLONN1="-80.0123"
export RESN1=".5"
export TSTEPN1="3"
export STATN1="NON"
#
# Savannah Harbor and Beaches
export NELATN2="32.3778"
export NELONN2="-80.4376"
export SWLATN2="31.8794"
export SWLONN2="-81.1329"
export RESN2=".5"
export TSTEPN2="3"
export STATN2="NON"
#
#========================================================================
#                    SPECTRA OUTPUT LOCATIONS                           =
#========================================================================
# Specta points defined as space delimited list of:
#   "name1:lat1:lon1 name2:lat2:lon2 name3:lat3:lon3 name4:lat4:lon4 name5:lat5:lon5 ...."
#
export SPECPOINTS="41008:31.4:-80.869 41112:30.79:-81.293 41004:32.501:-79.099 41029:32.810:-79.630 41033:32.280:-80.410 NCEP_53:30.67:-79.00 NCEP_57:32.13:-78.10 NCEP_60:33.58:-78.50"
#
#========================================================================
#                    WAVE TRACKING (and WAVE PARTITION) ON/OFF          =
#   SET: SUBDOCHSN, GEOGRAPH RESOL and TOLERANCE WAVETRACK PARAMETERS   =
#========================================================================
# IF WAVE TRACKING IS REQUIRED THEN WVTRCK="ON", OTHER WISE SET IT AS "OFF"
# IF WVTRCK IS "ON", ADDTIONAL INFORMATION IS REQUIRED, SEE BELOW
#
export WVTRCK="ON"
#
#IF WAVE TRACKING IS REQUIRED EXACTLY OVER THE COMPUTATIONAL GRID AND SAME SPATIAL 
# RESOLUTION: SET WVTONCG="1"  
# IF USER WANTS TO CHANGE ANYONE OF THE PARAMETERS THEN WVTONCG="0" AND USER MUST GIVE 
# ALL INFORMATION FOR THE DOMAIN OR SUBDOMAIN AND GEOGRAPHICAL RESOLUTION.
# BE CAREFULL, IF THERE IS ANY SPECTRAL OUTPUT LOCATIONS OUT OF THE NEW (REDUCED) DOMAIN
# FOR WAVE TRACKING NWPS WILL ABORT. 
# (This will be change in a new version, the user can get 1d-spectra but not g-h plots).
export WVTONCG="0"
export NELATWT="33.58"
export NELONWT="-78.10"
export SWLATWT="30.67"
export SWLONWT="-81.70"
export GEORESWT="4.0"
#
# PARAMETERS FOR TRACKING ALGORITHM for WVTONCG=0 or =1 THIS IS ALWAYS READ 
# *CAUTION* CHANGE THEM ONLY IF YOU KNOW WHAT YOU ARE DOING
# RECOMENDED VALUES WVTRKPA="10. 1. 0.25 0.1 10. 1."
#               dirKnob, perKnob, hsKnob, wetPts, dirTimeKnob, tpTimeKnob
export WVTRKPA="10. 1. 0.25 0.1 10. 1."
#
#========================================================================
#                   CURRENTS DEFINITION (SEE SWAN MANUAL)               =
#========================================================================
#export CURRL1="INPGRID CUR ............................."
#export CURRL2="READINP CUR ............................."
#
#========================================================================
#                    BOUNDARY CONDITIONS (SEE SWAN MANUAL)              =
#========================================================================
# IF BOUNDARY CONDITIONS WILL BE USED then BOUNDCOND=1, Otherwise =0; 
# Setting up BOUNDCOND here to zero will permanently disable BCs. 
# If you leave it as 1 the user will still have the option to disable 
# them from the interactive Run_NWPS GUI.
#
export BOUNCOND="1"
export FTPPAT1="multi_1"
export FTPPAT1B="multi_1"
export FTPPAT2="CHS"
export NFTPATTEMPTS="3"
export WAVECPS="multi_1.CHS55.spec.swan,multi_1.CHS59.spec.swan"
#
# THE FOLLOWING LINES MUST BE COMMENTED. IF YOU ADD BOUNDARY COMMAND LINES FOR YOUR
# DOMAIN, ADD THEM WITH THE "#" AS A FIRST CHARACTER, IF YOU DECIDE NOT TO USE BOUNARY
# CONDITIONS (BOUNCOND="0") THEY WILL REMAIN AS A COMMENTED LINES. IF YOU DECIDE TO USE
# BOUNDARY CONDITIONS (BOUNCOND="1") NWPS WILL INCLUDE THE INFORMATION IN THE ACTUAL 
# INPUT FILES WITH NOT COMMENT CHARACTER
#
#$BOUNDARY COMMAND LINES
# BOUN SEG XY 281.90 30.67 278.7 30.67 VAR FILE 0.00 'multi_1.CHS55.spec.swan'    1 &
# 0.90 'multi_1.CHS54.spec.swan'    1 &
# 1.70 'multi_1.CHS53.spec.swan'    1 &
# 2.40 'multi_1.CHS52.spec.swan'    1 &
# 3.20 'multi_1.CHS51.spec.swan'    1
#$
# BOUN SEG XY 281.90 33.58 281.90 30.67 VAR FILE 0.00 'multi_1.CHS59.spec.swan'    1 &
# 0.72 'multi_1.CHS58.spec.swan'    1 &
# 1.45 'multi_1.CHS57.spec.swan'    1 &
# 2.18 'multi_1.CHS56.spec.swan'    1 &
# 2.91 'multi_1.CHS55.spec.swan.cp' 1
#$
# BOUN SEG XY 281.10 33.58 281.90 33.58 VAR FILE 0.00 'multi_1.CHS61.spec.swan'    1 &
# 0.40 'multi_1.CHS60.spec.swan'    1 &
# 0.80 'multi_1.CHS59.spec.swan.cp' 1
#$END BOUNSEG
#